{{indexmenu_n>04}}

====== Getting Connected ======

Follow the setup steps in the order they are given to ensure that your LaCie hard drive's volume mounts correctly on your computer.

===== Step 1 - Connect the interface cable =====

Connect the interface cable from the LaCie d2 to the computer. \\ {{:products:d2-usb3:ill:d2-usb3-setup-01.jpg?400|}}

~~pgbreak~~

===== Step 2 - Connect the power supply =====
{{:products:d2-usb3:ill:d2-usb3-setup-02.jpg?400|}} \\ 

Connect the power supply in the following order:
  - The power input port on the back of the LaCie d2.
  - A live power outlet.

The LaCie d2 will power on automatically when it is connected to a computer that is turned on and a live power outlet.

<note>**Note:** If the hard drive’s volume does not mount on your computer, see troubleshooting topics at [[help|]].</note>

~~pgbreak~~

===== Step 3 - Launch LaCie Setup Assistant =====

{{page>:en:static:lsa-2:standard}}

~~pgbreak~~

===== Disconnecting the hard drive =====

In order to avoid file system corruption, it is important to unmount your hard drive’s volumes before disconnecting the interface cable. See [[unmounting|]] for details.