User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:manuals:d2-2big-5big-network2:led [01 Mar, 2013 13:06] (current)
Line 1: Line 1:
 +{{indexmenu_n>​02}}
  
 +====== LED Behavior ======
 +
 +The front and rear LEDs indicate drive status and activity (only the 2big and 5big have rear drive LEDs). This section describes the behavior of the LED indicators.
 +
 +<note tech>​**Technical note:** Even if you have turned off the front LED using the Dashboard, events triggering a red light will always cause the front LED to turn on.</​note>​
 +
 +++++ d2 |
 +
 +^ Front LED Color ^ State ^
 +| Blinking blue \\ {{:​static:​led:​led-dashed2-blue.png?​nolink|}} | Occurs as the device is booting; will cease once the drives are fully initialized |
 +| ::: | Backup in progress |
 +| Solid blue \\ {{:​static:​led:​led-solid-blue.png?​nolink|}} | Drive working (read/​write) |
 +| Blinking red \\ {{:​static:​led:​led-dashed2-red.png?​nolink|}} | Temperature alert (first level) |
 +| ::: | Power supply has been cut but power is still being supplied through the UPS |
 +| Solid red \\ {{:​static:​led:​led-solid-red.png?​nolink|}} | Temperature alert (critic level) – the product will shut off |
 +| ::: | Power supply has been cut and the UPS has run out of reserve power – the product will shut off |
 +
 +++++
 +
 +~~pgbreak~~
 +
 +++++ 2big/5big |
 +
 +^ Front LED Color ^ Rear LED Color ^ State ^
 +| Blinking blue \\ {{:​static:​led:​led-dashed2-blue.png?​nolink|}} | Activity LED for working disk(s) (until they are fully initialized) \\ {{:​static:​led:​led-dashed1-blue.png?​nolink|}} | Occurs as the device is booting; will cease once the drives are fully initialized |
 +| ::: | Activity LED for working disk(s) \\ {{:​static:​led:​led-dashed1-blue.png?​nolink|}} | Backup in progress |
 +| ::: | Blinking blue/red \\ {{:​static:​led:​led-dashed2-bluered.png?​nolink|}} | RAID synchronizing;​ will cease once operation has concluded |
 +| Solid blue \\ {{:​static:​led:​led-solid-blue.png?​nolink|}} | Activity LED for working disk(s) \\ {{:​static:​led:​led-dashed1-blue.png?​nolink|}} | Drive working (read/​write) |
 +| Blinking red \\ {{:​static:​led:​led-dashed2-red.png?​nolink|}} | Activity LED for working disk(s) \\ {{:​static:​led:​led-dashed1-blue.png?​nolink|}} | RAID is degraded; data is intact but no longer protected from further failed disks |
 +| ::: | Solid red for non-functional disk(s) \\ {{:​static:​led:​led-solid-red.png?​nolink|}} | ::: |
 +| ::: | Activity LED \\ {{:​static:​led:​led-dashed1-blue.png?​nolink|}} | Temperature alert (first level) |
 +| ::: | ::: | Fan is not spinning |
 +| ::: | ::: | Power supply has been cut but power is still being supplied through the UPS |
 +| Solid red \\ {{:​static:​led:​led-solid-red.png?​nolink|}} | Activity LED for working disk(s) \\ {{:​static:​led:​led-dashed1-blue.png?​nolink|}} | Temperature alert (critic level) – the product will shut off |
 +| ::: | Activity LED for working disk(s) \\ {{:​static:​led:​led-dashed1-blue.png?​nolink|}} | Power supply has been cut and the UPS has run out of reserve power – the product will shut off |
 +| ::: | Solid red for non-functional disk(s) \\ {{:​static:​led:​led-solid-red.png?​nolink|}} | RAID has failed and data has been lost |
 +| ::: | Off in disconnected disk(s) | Disk(s) is/are disconnected |
 +
 +++++
© LaCie 2024