Connect the power supply in the following order:
The power input port on the back of the LaCie d2.
A live power outlet.
The LaCie d2 will power on automatically when it is connected to a computer that is turned on and a live power outlet.
Note: If the hard drive’s volume does not mount on your computer, see troubleshooting topics at
Getting Help.
LaCie Setup Assistant (LSA) must be launched before using your drive. It will allow you to:
Easily format the hard drive according to your needs
Copy the User Manual to your computer
Install software for added features
Register your LaCie device
Important info for Thunderbolt on Windows: LaCie Setup Assistant only works through the USB connection. Therefore, it is recommended that you connect via USB and run LaCie Setup Assistant. Once LaCie Setup Assistant is finished, disconnect the d2 Thunderbolt 2 USB 3.0 (see
Unmounting Your Hard Drive) from the USB port and install the Thunderbolt drivers for Windows (see
Install Drivers (Windows Only)). You can connect via the Thunderbolt interface once the drivers are installed.
Important info: If you do not launch LSA or if you quit it after the formatting has begun, your drive will not be ready to use and will require manual formatting. The User Manual and utilities will not be available and will have to be downloaded from the LaCie website:
www.lacie.com/support/.
Launch LaCie Setup Assistant
Windows users
AutoPlay: Windows AutoPlay may detect your LaCie hard drive as soon as it is connected to your computer. If the AutoPlay window appears, choose Open folder to view files using Windows Explorer and double-click LaCie Setup.
Manual access: Open the LACIE SETUP volume in Computer/This PC and double-click LaCie Setup.
Mac users
Open the LACIE SETUP volume on your desktop and then double-click LaCie Setup.
Setup
The LaCie Setup Assistant guides you through formatting and registering your hard drive as well as installing LaCie software utilities. Follow the onscreen prompts to complete the setup.
Alternatively, you can use your disk management utility program to format or partition your LaCie drive. See Optional Formatting and Partitioning for details.
Important info for Windows users: While running LaCie Setup Assistant, generic pop-up windows may ask if you wish to change your computer's settings. This is a normal request when formatting a disk or installing certain software, such as Genie Timeline. To successfully complete LaCie Setup Assistant, LaCie recommends that you agree to change the settings.
Important info for Mac users: You may be prompted to enter your computer password to continue with LaCie Setup Assistant.
Important info regarding Mac OS X: Certain versions of LaCie Setup Assistant are not compatible with USB connections on Macintosh computers running Mac OS X 10.11, also known as El Capitan. If LaCie Setup Assistant experiences problems, you can try connecting your LaCie storage using another interface port on your computer (for example, Thunderbolt). If you are unable to use another interface port, format your LaCie hard drive using Disk Utility. For instructions on how to format your LaCie hard drive for Mac, see the chapter Formatting and Partitioning > Mac Users.
Software will be installed on the product's storage, not on your computer. It will be located on the volume entitled “Compatible” or “LaCie Share” if it exists, otherwise on “LaCie”.
LaCie software utilities may be installed at any time. Once the format is complete, the LaCie Setup Assistant application will be available on: