Backup
The Computers and Backup tab includes helpful wizards to configure backups for Windows workstations on the network and your LaCie professional server:
Technical note: Disconnect any external USB storage when rebooting the LaCie professional server. The server may hang at boot if a USB device is attached to one of its USB 2.0 ports.
To access the backup wizards:
-
Click on the tab
Computers and Backup.
Workstation Backup
Setting up scheduled backups
Automate backups for the Windows workstations on your network. By default, backups will run twice a day at 12:00 AM and 6:00 AM. In most business environments, these times are optimal due to reduced network traffic. To guarantee that backups are not missed, LaCie recommends that you allow the server to wake up workstations that are in sleep or hibernate modes. To configure the backup:
Find the Windows workstation in the list of computers. Note that the
Backup status is
Not set up. Right click on the computer to select
Set up Backup for this computer.
Select files for backup. It is recommended that you select “Back up all of my files and folders” on the workstation. However, you have the option to select the files and folders to back up.
Click
Save changes to confirm the backup settings.
Read the backup summary then click
Close to exit the wizard.
The
Backup status for the workstation is now
Set up.
Initiating a manual backup
You can initiate a manual backup should you wish to save data before the next scheduled backup:
Right click on the workstation to select
Start a backup for the computer.
Name the backup. The default is
Manual backup but you can use a name that suits your needs. Click
OK.
The backup will begin immediately.
Once the backup is complete, the
Backup status will read
Successful.
Server Backup
LaCie RAID Configurations and Windows® Backup
LaCie recommends backing up all data in your office, including files stored on traditional backup servers such as LaCie professional servers. To facilitate local backups, all LaCie professional servers include a simple wizard that will help you to configure automated backups. Many IT administrators and office managers have considered their unique environment for backing up data so this Technical Brief will not delve into the logistical requirements for maintaining data at one or more sites.
However, it is important to note the limitations for backing up data beyond a fixed storage capacity. Please keep in mind that the wizard will not allow you to back up data from a volume that is greater than 2TB. Since the majority of businesses and IT professionals take advantage of commercial and private backup solutions, the recommended LaCie RAID configurations include volumes greater than 2TB (see Technical Brief: 4big Rack Office RAID). If you intend to use the convenient backup wizards found in this Technical Brief and your server includes partitions greater than 2TB, see the Technical Brief: 4big Rack Office RAID to learn how to partition volumes. Please note that partitioning volumes will delete data. Make certain to copy all files before partitioning and recreating RAID arrays.
For further information on the 2TB volume limitation with the Windows Backup Wizard, please see the link below:
2TB Limit
Setting up scheduled server backups
Note: Before launching the server backup wizard, please make certain to connect a USB hard drive to one of the server's USB 2.0 ports. Always disconnect external hard drives from their USB 2.0 ports before restarting or booting the LaCie 4big Rack Office. The server may hang at boot if a USB 2.0 hard drive is connected to one of its ports.
Find the server in the list of computers. Note that the
Backup status is
Not set up. Right click on the server to select
Set up Backup for this server.
The
Getting started page offers a brief explanation on setting the server backup.
Click Next to continue.
Select the hard drive you wish to use for the server backup. In this example, we are using a LaCie 4big Quadra (desktop storage). It is connected to one of the server's USB 2.0 ports. Check the box next to
No disk label then click
Next.
You may receive the note below when using drive enclosures that house more than one hard drive. Click
Yes to continue or
No to abort the wizard.
Name the backup then click
Next.
-
If a partition in the server storage is greater than 2TB, the backup wizard will prompt the administrator to divide the hard drive. Repartitioning the storage hard drives is too complex an operation for the backup wizard. If you wish to use the backup wizard to backup for all your data, please read the
Technical Brief: 4big Rack Office RAID for instructions on repartitioning. If you wish to continue with this backup, click
OK at the prompt.
By default, the partition
Data1 is greater than 2TB. To continue the backup wizard with the remaining partitions, we have deselected
Data1. Click
Next to continue.
Confirm the backup summary then click
Apply settings.
Click
Close to exit the wizard.
Initiating a manual server backup
You can initiate a manual server backup should you wish to save data before the next scheduled backup:
Right click on the server to select
Start a backup for the server.
Click
Yes at the prompt to start the server backup.
The server backup will begin immediately.
Once the server backup is complete, the
Backup status will read
Successful.
Server-to-Server Backups