This user guide gives you step-by-step instructions on how to install, configure and connect a LaCie 12big Rack Serial 2 system to your host computer system, and how to use and maintain the system.
This user guide assumes that you have a working knowledge of storage appliance products. If you do not have these skills, or are not confident with the instructions in this guide, do not proceed with the installation.
The personnel referred to within this document are defined as follows:
|CLI||Common Line Interface||PDU||Power Distribution Unit|
|PSU||Power Supply Unit||EEPROM||Electrically Erasable Programmable Read-Only Memory|
|RAID||Redundant Arrays of Inexpensive Disks||EM||Enclosure Management|
|PCM||Power Cooling Module||ESD||Electro-Static Discharge|
|SAS||Serial Attached SCSI||ESI||Enclosure Services Interface Processor|
|SATA||Serial ATA||SBB||Storage Bridge Bay|
|SCSI||Small Computer System Interface||I2C||Inter-Integrated Circuit|
|SEP||Storage Enclosure Processor||SES||SCSI Enclosure Services|
|LED||Light-Emitting Diode||SFF||Small Form Factor|
|UPS||Universal Power Supply||PCB||Printed Circuit Board|
|VPD||Vital Product Data|